:	Nov 26, 2004

.

Fully extend the steering column for access.

.

Remove the steering wheel.

.

Remove the steering column upper shroud.   Release the 4 clips.

.

Remove the steering column lower shroud.   Remove the 3 Torx screws.   Release the steering column adjustment lever.

.

Disconnect the 2 electrical connectors from the steering column multifunction switches.

.

Disconnect the 2 electrical connectors from the clockspring.

.

Remove the steering column switch assembly.   Remove the 4 Torx bolts.

.

Remove the instrument panel access panel.   Release the 2 clips.

.

Remove the steering column side trim panel.   Release the clips.   Repeat the above procedure for the other side.

.

Remove the steering column gaiter panel.   Remove the 2 Torx screws.   Release the 2 clips.

.

Remove the instrument cluster.   Remove the 2 Torx screws.   Disconnect the electrical connector.

.

Install the instrument cluster.   Connect the electrical connector.   Tighten the Torx screws.

.

Install the steering column gaiter panel.   Secure with the clips.   Tighten the Torx screws.

.

Install the steering column side trim panel.   Secure with the clip.   Repeat the above procedure for the other side.

.

Install the instrument panel access panel.   Secure with the clips.

.

Install the steering column switch assembly.   Tighten the Torx bolts to 3 Nm (2 lb.ft).

.

Connect the clockspring and multifunction switch electrical connectors.

.

Install the steering column shrouds.   Tighten the Torx screws.

.

Install the steering wheel.

.

Using T4, configure a new instrument cluster.